|Web Width||400mm to 1500mm|
|Maximum Operating Speed||70M/min, 150M/min, 250M/min|
|Plate Thickness||25mm, 30mm, 35mm, 45mm(M.S.)|
|Material||Polyster, Film, Foil, BOPP, LD, LLDP, Paper, PP, HM|
|No. of Colours||1 to 12|
|Doctor Blade System||Easy Change Over, Universal Oscillation Type for Long Life of Cylinder|
|Drying System||Single Side Closed Chamber|
|Heating System||Electrical / Hot Air / Thermic Fluid|
|Gear Box||Sleeve Type, Spiral Bevel|
|Dimension of Station||600 x 2000 x 35|
|Idler Rollers||Low Friction Dynamically Balanced|
|Roll Outer Diameter||800mm on Unwinder & Rewinder|
|Registration Control System||Vertical Motorised|
1 Drive VFD System(70MPM), 3 Drive VFD System(120MPM)
5 Drive VFD System(150MPM), 3 Drive Servo Based System(250MPM)
|Unwinder & Rewinder||Shafted / Shaftless|
- Shaft less System for Unwinder and Rewinder.
- Low friction ball screw compatible with auto register control system.
- Rubber Roll Impression system with linear guide ways.
+ Rotogravure Description
The MSC-HS is a trolley-type press featuring a solid press frame designed for high speed performance.The shafted configuration enables the press to use either conventional integral cylinders or cylinder sleeves. The press design enables fast make-ready operations and quick changeovers of the entire inking system and the gravure cylinder or, alternatively, only the gravure cylinder.
The doctor blade is fully adjustable. Replacement of the doctor blade holder or only the doctor blade without the use of tools via a quick release mechanism. Fully automatic trolley changeover and fast set-up operation. The trolley can be stainless steel or teflon-coated. A dedicated trolley is available for seal coating. The inking system has been designed for consistent and uniform inking at high speed, as well as low volume of ink in circulation throughout the press.
Modular and highly efficient drying system and ventilation. Single or double length dryers are available to provide the most appropriate system to meet specific production requirements. In addition to conventional heating systems, it is possible to use hot water as the energy source if the temperature range is compatible and recovered thermal energy is available. The book-type opening of the hoods allows optimum access to the dryers for web threading, cleaning and maintenance of rollers and air nozzles.
The printing press features a highly advanced press automation content. The SIEMENS basedcolour touchscreen provides full parameter recipe saving and recorder for quality tracking. All auxiliary equipment process data are integrated in single recipes for consistent job repeatability.
The press can be equipped with either shaftedorshaftless duplex winders. Automatic splice operations can be performed at maximum production speed. The efficient technical solutions that optimize the use and recovery of electrical power enable an important reduction in the level of energy consumption.
Five drive servo driven automatic web tension control systems : Load cell and or dancer based closed loop Servo motor control & drive on (1) Unwind (2) In-feed System (3) Printing Station (4) Out -feed System (5) Rewind.
Master operator control panel mainly consists of touch screen operator interface located at rewind side and also at unwind side, facilitates easy operation from both the end. Electro-electric Edge Guiding System with Ultrasonic edge sensor and PMDC motor is most efficient for web liner application.
Distinctively designed and precisely machined, strong and sturdy, steel frame structure completely machined on CNC-VMC, maintains accuracy over long dependable life and ensures less vibration with 45mm thickness even with optimum line speed.
Pneumatic Ink pump on each station with ink flow/pressure adjusting valve
Motorized web video inspection system consists of high quality CCD color camera, Industrial PC & Monitor (facilitates sequential inspection of the lateral and entire print repeat of the web). Automatic Register Control System Automatic length and side-lay register control system with full colored touch screen operator interface facilitates automatic mark centering and recognition. Automatic selection of different control parameters during machine speed changes and control parameters individually configurable to different materials for easy operator selection.